Starlink Gen 3 Roof Ridge Mount – No-Drill Ballast Frame for 8–16 Bricks

Install your Starlink Gen 3, Standard 4, Standard 4X, or Enterprise antenna on a pitched roof without drilling into the roof surface with this heavy-duty ballast roof ridge mount.

The A-frame style mounting structure sits across the roof ridge and uses brick ballast and gravity to hold the mount securely in position. Designed to accommodate approximately 8 to 16 compatible bricks depending on the installation configuration, it provides a practical alternative to permanent roof-penetrating mounts.

By avoiding screws and drilled holes through the roofing surface, the no-drill design helps preserve the roof membrane and reduces the risk of water intrusion associated with roof penetrations.

Key Features

Compatible with Multiple Starlink Models
Designed for compatible Starlink Gen 3, Standard 4, Standard 4X, and Enterprise antenna installations.

No-Drill Roof Installation
The ballast-style design sits on the roof ridge without requiring permanent holes through the roofing surface.

8–16 Brick Ballast Capacity
The frame can be configured with approximately 8 to 16 compatible bricks to add weight and improve mounting stability.

Gravity-Based Mounting System
Uses the combined weight of the frame and brick ballast to help keep the mounting system securely positioned on the roof.

Helps Protect the Roof Surface
Because the installation does not require roof penetration, it helps reduce the risk of leaks caused by drilled mounting holes.

Adjustable Pipe Adapter
The adjustable adapter allows the antenna angle to be fine-tuned for different roof slopes and installation requirements.

Stable Roof Ridge Frame
The wide A-frame structure distributes the ballast across both sides of the roof ridge for a balanced installation.

Heavy-Duty Outdoor Construction
Built for long-term outdoor installation on suitable residential, garage, cabin, workshop, and other pitched roofs.

Ideal Applications

• Residential pitched roofs

• Roof ridge installations

• Garages

• Cabins and vacation homes

• Workshops

• Rental properties

• Locations where roof drilling is undesirable

Compatibility

• Starlink Gen 3

• Starlink Standard 4

• Starlink Standard 4X

• Starlink Enterprise

• Roof ridge installation

• Adjustable pipe adapter

• 8–16 brick ballast configuration

• No-drill installation

Important Note

Bricks are not included unless specifically stated in the package contents. Always confirm brick dimensions, total ballast weight, roof pitch, roof condition, and local wind conditions before installation.

The no-drill design helps avoid roof penetrations and can reduce the risk of water intrusion associated with drilling, but it should not be interpreted as an absolute guarantee against roof leaks.

Starlink antenna is not included unless specifically stated.