5.8G Outdoor Wireless Bridge Point to Point Access PTP/PTMP CPE355 100Mbps 1.8ML Long Range WiFi Extender14DBI High Gain Antenna

• [Point to Point Wireless Bridge]: CPE355 is a 5.8G long range WiFi extender which complies with the IEEE802.11a and IEEE802.11n standards to ensure interoperability. The 5.8G outdoor network bridge is capable of sharing internet to remote location up to 3KM (Barrier Free) and its point to point paring function saves you much time and effort from complex wire setup process. It is a simple, easy and professional way for long range wireless coverage, data transmit, wireless monitoring.
• [Easy Installation]: Pre-configured WiFi extender with ethernet port with built-in 14dBi panel antenna, the transmit/receive (point to point) wireless distance is more than 3KM. Suitable for long range video transmission point to point WiFi coverage, it supports Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode, no need to set, the two units can work at the same time, no need long cable for connecting to the cameras or your PC
• [Long Range Transmission Distance]: Up to 3km, actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house. The point to point bridge outdoor is a cool WiFi access point extender. Sharing the same network with your garage, barn, stable, warehouse, shop ect.
• [Widely Application]: Any place required cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitor networks. Outdoor wireless bridge router connects an IP Wireless Camera to a secondary port and utilize its long-range connectivity to send video back through the wireless network for extended coverage. This long-range wireless bridge is widely used in many venues.
• [Built for Outdoor Wi-Fi Coverage]: IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. This outdoor wireless bridge aka WiFi access point extender can be used in any environment. Lightning protection, waterproof, dustproof, antifreeze, high-temperature resistance. The secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.

• Wireless Bridge CPE355 Kit, Extend your Network form One Building to Another without Wire Connection

  Great for sharing internet network to a long distance, works as outdoor access point, manage video surveillance for different buildings

  The CPE355 kit is one pair of outdoor high power and high performance 100Mbps wireless bridges, which works at 5GHz frequency. Supports Point-to-Point and Point-to-Multipoint wireless connection. It is more stable and of higher speed and has better anti-interference performance than 2.4GHz wireless bridge. Moreover, it is easy to manage through the WEB interface.

  CPE355 Kit Function:

• The device can work in auto pairing mode: They are simple to use, connect both bridges to the PoE power adapter to start working, they will auto pair in few minutes. Customize mode: need to connect the bridges to the computer through ethernet cable, and configure the master & slave parameters, this mode suits for experienced technician.
• The device can be used for sharing internet network to a long distance, outputs WiFi hot point, also can be used for transmiting the long range IP cameras' video stream to the control center without complicated wiring connection.
• Auto pairing mode works for point-to-point access connection, customize mode can configure the point to multiple point connection.

CPE355 Kit Application:

1. Sharing internet network to a longer distance, the master bridge gets the internet and transfers to the slave which can be connected to the router or computer.
2. Outdoor access point, the master bridge connects to internet source and outputs WiFi hot point transmit up to 1.8miles & 60 degrees angle, you can get access to the WiFi hot point in this area.
3. Connects the IP cameras from another building without wire connection, you can manage the IP cameras of different places in one DVR system.
4. Point to multiple point access, you can connect multiple slave bridges, to manage more than one building's IP cameras in one DVR system.

Point-to-Point Connection for Extended Internet Network

Connection Guide

The master bridge and slave bridge must be installed face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects will lead to the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge.

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge.

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connects to the router through an ethernet cable.

Step 2: the PoE port of the PoE adapter connects to the LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: The PoE port of the PoE adapter connects to the LAN port of slave bridge through an ethernet cable.

Step 2: Tthe LAN port of the PoE adapter connects to the LAN port of the computer or router by another ethernet cable.

Point-to-Point Connection for Video Surveillance

Connection Guide

The master bridge and slave bridge must be installedface to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects will lead to the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge.

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge.

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: The LAN port of the PoE Adapter connects to the DVR through an ethernet cable.

Step 2: The PoE port of the PoE adapter connects to the LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: The PoE port of the PoE adapter connects to the LAN port of slave bridge through an ethernet cable.

Step 2: The LAN port of the PoE adapter connects to the LAN port of the switch by another ethernet cable

Point-to-Multiple Point Connection for Video Surveillance

Connection Guide

The master bridge and slave bridge must be installed face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects will lead to the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge.

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge.

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: The LAN port of the PoE Adapter connects to the DVR through an ethernet cable.

Step 2: The PoE port of the PoE adapter connects to the LAN port of the master bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: The PoE port of the PoE adapter connects to the LAN port of slave bridge through an ethernet cable.

Step 2: The LAN port of the PoE adapter connects to the LAN port of the IP cameras by another ethernet cable.

CPE355 Wireless Bridge Interface

Overview

The wireless bridges work by two modes, auto pairing mode with pre-programmed suits for newbie and customize mode suits for experienced user.

Auto pairing mode:

Connect the bridges to the PoE power adapter, the Power LED lamp turns green, system is power on, when both bridges are power on, they will auto pair in a few minutes, during the pairing the LAN status LED lamps all turn green. The digital LED indicator displays the numeric in red color.

You can find a good frequency without interference by pressing the "RST" button to change the channel, short press the button, the LED indicator will display the numeric "0","1","2","3"..."F" one by one, and change in cycle, each numeric means a different frequency, you can find the details in the user manual.

At the auto pairing mode, the bridge also outputs WiFi hot point, and the access password is pre-programmed in auto paring mode. When the channel changes, the access password changes as well. For example: the WiFi hot point name is CPE5G_5G161, and the default password is zllinkcpe123456161, if the name is CPE5G_5G153, the password will be zllinkcpe123456153. The last three numbers of the password must match the last three numbers of the name.

Customize mode:

At this mode the bridges must be connected to the computer and set different IP addresses and working modes, short press the "RST" button will not be functional at this mode, but you can press and hold this button for over 10 seconds to reset to factory setting.

Application

Parameters